Kategoria guztiak

Beste hizkuntza batzuk

  • R009 RF atea
  • R009 RF atea

R009 RF atea

Dimentsioa: * 157 44.5 * 6.5cm

Maiztasuna: 8.2MHz 

Materiala: Aluminiozko aloria

Tentsioa: 220 / 110V

Carton tamaina: * 160 48 * 10cm

Enbalatzeko: 1pcs / ctn, 10KG, 0.08CBM

  • Produktuen gaineko informazioa

R009 RF gate is made of aluminium alloy. Highlight RF gate is made by the most advanced technology (DSP), digital model distinguish technology (ADD/ RF), AGC control technology and QF scanning technology, with high sensitivity, excellent anti-interference ability and suitable for all of the RF 8.2MHz/ 10MHz EAS accessories.

Its advantages as below:

1. Wide and excellent detection performance. 

2. Strong anti-interference ability, as below picture shows. 

3. Stable, no false alarm. 

Arbel elektronikoaren sarrera

  1. TX taula (igorlea)


2.  RX board (receiver)




Instalatu aurretik, kontuan izan:

a. The frequency is 8.2MHz or 10 MHz. 

b. The distance between TX and RX antenna depends on the tags and labels you use.

    Normally, for large square tag, 0.5m-2m, for 4x4cm label, 0.5m-1.4m.

c. RF gate should be at least 1 meter far away from big metal frame, elevator, cashier, the computer and so on.

d. Individual power supply is needed.


1. TX-RX connect


2. RX-TX-RX connect 


3. Synchronization

Several RF systems in one entrance, all TXs should be synchronized. The JP3 in one TX board jumps to Master and all the others jump to Slaver.

The detail connection as below:



All kinds of EAS products are available in Highlight: