- toote Info
1 : products detail pictures:
1 set include 2 pcs door sensors +2 pcs batteries+2 pcs stickers+1 piece U disk:
2. Aku paigaldamine
Sensors are powered by ER18505 battery.
When yellow lights keeps flashing on receiver sensor, or red lights flashing on transmitter sensor, you should
Replace a new battery. Please note the battery installation direction:
3. Sensors Installation
Sensors should be stick on the two sides of entrance with the stickers we support.
Please make sure they are face to face and in same height.
If receiver sensor doesn’t get the signal from transmitter sensor, the red light flashes.
If receiver sensor get the signal from transmitter sensor, no red light flashes.
Tilt position can be adjusted by metal stand (purchase on selection)
Can penetrate glass door with a tilt angle of less than 30 degrees
Paste on the door frame or wall with double-sided sticker
4. Receiver Settings
Receiver is operated by two touch buttons. When there is no touch operation, the screen will shut down
After 10 seconds. Long press K1 or K2 to enter the setup menu. Or connect receiver to computer via a
USB cable and set the parameters through the client program.
Set the system time, long press K 1 to enter the setting option.
Long press K 1 to change position, long press K2 to save and exit.
Short press K 1, K2 to adjust the numerical value.
High Speed Madal kiirus 2 Suur jõud vähese energiatarbimise
5. Data Query and Export:
A: Operation on the device and Data Browse
Enter the menu bar, select "2 Data browse" and continue press K1 to enter. Long pressing the K1 to
Switch the date year/month/day, Short pressing K1 K2 to switch records.
Can query the accumulated annual visitors traffic for the last 3 years/ the total number of Per month in
The last 12 months and the total number of per day in the last 30 days
B: Export data via a USB cable from a computer
For further details, please check the software tool instruction.
C: Export data via U disk
Only support U disk with FAT32 file system, recommend the storage capacity not exceed 32G, use the matching converter,
then insert to Micro USB port on the sensor.
Enter the “cache management” menu, choose the “a Download to U disk”, wait for the download to complete.
The sensor counter only provides export function for undownloaded data, If you want to download all the data
Again from sensor, You need to perform “c re-download setting” firstly then operate the “a Download to U disk”.
Forbidden to operate any steps during the data record download process, the ID of each sensor counter device is unique,
U disk will create a directory according to different ID codes and convenient to manage data records from many devices.
Pull out the U disk until finished all of downloads.
Software page details: Easy to operation and Export data report
6. Common Problems Lahendus:
6.1 Red light on Counter terminal keeps flashing:
6.1.1. The infrared sensor counter transmitter and the counter terminal are not aligned or not at the same height
Solution: Adjust the counter transmitter and terminal installation position so that both of them are at the same height and face to face.
6.1.2. There is obstacles blocking between sensors
Solution: Remove obstruction
6.1.3. Battery in transmitter is low
Solution: Replace new battery
6.1.4. The working mode of the transmitter and the receiver do not match
Solution: Adjust the high speed and low speed modes to make them consisten
Võta meiega ühendust
- Tel: + 86-21-52353905
- Faks: + 86-21-52353906
- E-post: email@example.com
- Aadress: ruum 818-819-820, hoone B, St. NOAH, nr 1759, Jinshajiangi tee, Putuo piirkond, Shanghai, Hiina.