- toote Info
HPC099 bus passenger counter :
HPC099 is an automatic bus passenger counting machine with high accuracy (96% -98%), which is developed based on
binocular stereo vision technology and intelligent video analysis technology.
The binocular camera with artificial human eye engineering design will collect real-time passenger movement information,
In the door range and rapidly computes the 3D data of the target passengers through the image processor.
The 3D data includes the height and shoulder width of the target passengers and so on.
Newest technology integrate sensor with processor into 1 device
Benefits of deploying passenger counting system:
• Comparing and verifying fare collection figures with passenger counts
• Validating passenger counts to justify payments due to transportation companies
• Scheduling maintenance and cleaning based on vehicle usage
• Optimizing vehicle load across regions, time periods, or other factors
• Monitoring service quality
•Just 1 bus door with 1 piece sensor, processor integrated
•More faster data processing
A: In order to extend the service life of the equipment, please install the equipment
as near as possible in the part where the bus' vibration is weak
B: To make sure of the normal heat dissipation of the equipment, please avoid the
poor ventilation position (such as the trunk of the vehicle) for installation, and keep
the distance of 15 cm from other objects on the same plane of the equipment
C: The counter should be installed horizontally. Please pay attention to waterproof,
moisture-proof and lightning-proof when installing the equipment, and keep the vehicle
stationary to prevent the equipment from falling and being damaged.
2. Camera Installation:
a. The 3D binocular camera should be installed as perpendicular to the ground as possible,
and the angleperpendicular to the ground can be adjusted within 15°outside of the car area is
less than one-third or all inside the car.
b. The distance between the camera and the door should be longer than 15cm;
the installation positioncan also refer to the position (photo as below) or it can be installed
in the roof position (photo as below), provided that the ground height and camera height are about 2.1 meters.
II. Software Installation
1) The HPC099 bus counter with default IP address is 192.168.1.253
2) Interface: default value 9011
3) Log in: Click the “Log in” button, If the login information is correct, The connection status will show that the device is connected successful.
Võta meiega ühendust
- Tel: + 86-21-52353905
- Faks: + 86-21-52353906
- E-post: email@example.com
- Aadress: ruum 818-819-820, hoone B, St. NOAH, nr 1759, Jinshajiangi tee, Putuo piirkond, Shanghai, Hiina.