CE certification approved.
Please contact us for the test report and the Certificate.

INTRODUCTION:

The HD001-E is a high performance Hand Held Metal Detector designed to meet the exact requirements of the security industry. Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.

OPERATION:

The HD001-E Operates on one 9volt standard or rechargeable battery. To install the battery, slide off the battery cover and place the battery in to its compartment while matching the +/- symbols.

Turn the unit on by pushing the on/off switch until it clicks on and the green LED is lit. The detector is now operational although and increase in sensitivity and depth range can be achieved by turning the sensitivity adjuster until the LED turn to red and a constant audio tune is heard.. Turn the sensitivity adjustor (anti-clockwise) until the red LED just turn to green the tone fades. The detector is now tuned for optimal sensitivity and depth rage.

Holding the unit with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30mm above the area to be scanned.

The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is held still over a metal object the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when in use.

PERFORMANCE:

The sensitivity of the detector is determined primarily try the size, shape and composition of the object to be detected.

Typical performance figures are given below:
Maximum Detection Range

Object	Low Sensitivity	Optimal Sensitivity
38 Caliber hand gun	25cm	30cm
Pen knife	12cm	26cm
Razor blade	5cm	12cm

HIGH/LOW SENSITIVITY OPERATION

Turn the high/low sensitivity switch during detection. On the high sensitivity, scanner will respond to all metal objects. On the low sensitivity, scanner will then only respond to bigger metal objects such as a hand gun, knife, etc and will not respond to small metals such as a coin, key, hatpin, etc.

RECHARGEABLE BATTERY SOCKET

You may use a 9volt rechargeable battery to power the detector. It takes four to six hours to fully charge the battery. The battery charger socket is located at the side of the detector.

EARPHONE SOCKET AND VIBRATOR BUTTON

The detector is equipped with an Earphone socket and a vibrator button. An earphone or Vibration function should be used in noisy work situations or in places where the operator does not wish for the audio tune to be heard in his surrounding area. Press vibrator button, vibrator works, release it, audio tune works.

SPECIFICATION:

Power 9V Standard or Rechargeable Battery( 270mW)
Operating Frequency 22KHz
Operating Current <50mA
Operating Voltage 7-9V
Recharging Voltage 12V DC or 9V AC
Operating Temperature -5℃to+55℃
Net Weight 411g
Dimensions 410mm(L)x85mm(W)x45mm(H)

Packing:

Inner packing: 42.5*11*6cm ,Gross weight: 620g per box.
Out packing: 45*46*32cm Gross weight: 13.4KG per carton, 20pcs per carton.

Optional:

Earphone: 20g.
Rechargeble battery:40g
Charger: 165g.

------------------------------------------------------------------------------------------------------------------------------------------