- Information sur le produit
R001 RF System is made of acrylic. Highlight RF system is made by the most advanced technology (DSP), digital model distinguish technology (ADD/ RF), AGC control technology and QF scanning technology, with high sensitivity, excellent anti-interference ability and suitable for all of the RF 8.2MHz/ 10MHz EAS accessories.
Electronic Board Introduction
- TX board (transmitter)
2. RX board (receiver)
Before installation, please note:
a. The frequency is 8.2MHz.
b. The distance between TX and RX antenna depends on the tags and labels you use. Normally, for large square tag, 0.5m-2m, for 4x4cm label, 0.5m-1.4m.
c. RF system should be at least 1 meter far away from big metal frame, elevator, cashier, the computer and so on.
d. Individual power supply is needed.
1. TX-RX connect
2. RX-TX-RX connect
Several RF systems in one entrance, all TXs should be synchronized. The JP3 in one TX board jumps to Maîtriser and all the others jump to Slaver.
The detail connection as below:
- Tél: + 86-21-52353905
- Fax: + 86-21-52353906
- Email: firstname.lastname@example.org
- Adresse: Bloc C, 5ème étage, bâtiment de TongPu, No. 1220, route de TongPu, Changhaï, Chine